Overview
The STS 1100 tinning station is designed specifically to resist the corrosive properties of lead-free solder. The station includes an integrated flux unit for tinning cross sections up to 2.5mm2 (14 AWG) and tinning lengths up to 5mm (0.2”). Cross sections up to 4 mm² (12 AWG) and tinning lengths up to 10 mm (0.39'') may be possible but testing should be done.
- Short cycle times
- Full control via CrimpCenter EASY operating software
- Designed for use with lead-free solder
- Consistently tinned diameters
- Wire cross sections up to 2.5 mm² (14 AWG), up to 4 mm² (12 AWG)
Processing Capabilities
- Programmable Solder Length and Dwell Timing
- Programmable Fluxing Length and Dwell Timing
Application Range
The STS 1100 tinning station is designed for fluxing and tin coating of stripped wire ends using lead-free solder. The STS 1100 is perfectly suited for either fully automatic crimping machines or transfer systems. Conductors are coated with flux before passing to the solder. The STS 1100 tinning station can accommodate leaded or lead-free solder and meets all requirements for evenly distributed tinning. All surfaces of the STS 1100 that are exposed to aggressive lead-free solder (such as the solder bath and pump), have been treated with a special coating to prevent corrosion and ensure a long product lifetime. If twisting of the conductor strands is required prior to fluxing and tinning, the STW 1100 twisting station can be integrated into your CrimpCenter in combination with the STS 1100 tinning station.
Wire Size Range :
Up to 2.5 mm² (14 AWG) Possibly
4 mm² depending on wire
CE-Conformity : The STS 1100 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
