Overview
The SLD 4100 double gripper module is used for double crimping applications of wires from 1 - 4 mm (0.039” - 0.157”) in outer diameter. The unit gathers two single wires in the proper orientation allowing the swivel arm gripper to collect them for the crimping process. Horizontal or vertical orientation is fully programmable and no mechanical adjustments are necessary. Individual wire lengths can be different and positioning offsets can be programmed to ensure optimal crimping results.
- Compact, fully pneumatic module
- Individual wire lengths can be different
- Programmable wire orientation and offsets
- All parameters are fully programmable (no mechanical adjustments)
- Simple programming directly in CrimpCenter EASY software
Processing Capabilities
- Double Crimp (2- or 3-terminals, CrimpCenter 36 S / 64 / 67)
- Double Crimp with Crimp / Seal (2-terminals, CrimpCenter 36 S / 64 / 67)
- Double Crimp with Crimp / Seal (2- or 3-terminals, CrimpCenter 36 S / 67)
- Double Crimp with Twist / Tin and Crimp (2-terminals, CrimpCenter 36 S / 64 / 67)
- Double Crimp with Twist / Tin (CrimpCenter 36 S / 64 / 67)
Application Range
The SLD 4100 can process two wires with outer diameters from 1 to 4 mm (0.039” - 0.157”). Each wire can have a different length and depending on the terminal design, wire orientation can be either vertical or horizontal. Wire orientation is fully programmable in the CrimpCenter EASY operating software and no tools are needed for changes.
Cable Outer Diameter (O.D.) : 1 – 4 mm (0.039” - 0.157”)
Dimensions (L x W x H) : 122 x 380 x 405 mm (4.80 x 14.96 x 15.95”) Including connections
Weight : 6.5 kg (14.3 lbs.)
CE-Conformity : The SLD 4100 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
