Overview
The PowerStrip 9500 RX is specially suited for processing micro coaxial cables and coaxial cables with center conductors as small as 36 AWG. It also processes most wire and cable types up to 6.5 mm (0.26") O.D..
- Very high precision level
- Processing of very small micro-coaxial cables
- For entire range of cable types and diameters withouth any blade change
- Fully programmable
Application Range
The PowerStrip 9500 RX programmable cut & strip machine processes micro-coaxial and coaxial cables with center conductors as small as 36 AWG and most wire and cable types up to 6.5 mm (0.26”) O.D. Due to the universal rotary incision unit and V-type cutting blades, the PowerStrip 9500 RX is able to process the entire range of cable types and diameters without any blade changes. Once the values for a particular cable and job are stored in memory, they can be retrieved in seconds. After pressing the “Start” key, the cable is centered and clamped with a forcecontrolled centering system. In a first processing step the blades execute the rotary incisions according to the programmed diameter and length position values. As soon as all the required incisions are completed, the cable is transported to the cutter head where it is cut and the various layers are stripped from both cable ends.
Min. Conductor Diameter : 0.15 mm (0.006”) / (36 AWG)
Wire Size Stranded :
Standard mode: 52 mm (2.05”) – 1000 m (39.370”)
Short mode < 52 mm (2.05”)
PC Software : Cayman PC Software
Max. Cable OD : 6.5 mm (0.26”)
Pull off Length Right Side :
Left side 40 mm (1.57”)
Right side 40 mm (1.57”)
Pull off Length Left Side :
Left side 40 mm (1.57”)
Right side 999.9 mm (39.37”)
Max. Transport Speed : Up to 1.95 m/s (6.4 ft/s)
Dimensions (L x W x H) : 660 x 580 x 390 mm (25.9 x 22.8 x 15.3”)
Weight : approx. 80 kg (154 lbs.)
CE-Conformity : The PowerStrip 9500 RX fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Programmable Processing Parameters
- Rotary speed
- Incision diameter
- Incision feed rate
- Blade incision pause
- Blade way back
- Stripping length
- Pull off length
- Pull off speed
- Discard function / Trimming function
- Multiple step / Multiple strip / Processing order
